Advantages of using solar collectors

The major advantage of solar collectors - simplicity and relative cheapness of manufacture, ruggedness in operation.

The only important point - please be aware that on a hot sunny day with no parsing water can overheat above the boiling point, so the design must take appropriate precautions.

Other, no less important advantage, is that the collector is able to capture and convert into heat more than 90% has got to him sunlight. Even with light cloud, its efficiency exceeds the efficiency of other types of batteries.

Conventional flat solar collectors have been designed for use in regions with warm sunny climate. They dramatically lose effectiveness in unfavorable days - in cold, cloudy and windy weather. Moreover, due to weather conditions, condensation and humidity lead to premature wear of internal materials, and this, in turn, - to a deterioration in the performance of a system and its breakdown. These shortcomings are eliminated by the use of evacuated collectors. Due to the high thermal insulation vacuum solar collectors are very efficient at low temperatures. Vacuum collectors are modular, ie the tube, you can add or remove as needed, depending on the requirements for hot water.

Solar thermal collector designed for heating water and used as a primary or supplementary heater in the hot water supply system. Antifreeze is heated by direct solar radiation. Collector can be used in systems with both natural and forced coolant circulation.

Benefits of solar collector

• Using a system of non-freezing fluid in combination with modern materials, insulation allows the installation to work even in the winter months.
• Installation of water heating by solar energy does not require maintenance, since a completely closed loop, and the whole process of heat transfer control of the microprocessor.
• Modern architectural approach for designing water supply and heating makes it possible to organically integrate the solar collector in the roof or the facade of the building.
• Solar thermal collector is a renewable source of energy and meets all environmental standards.
• Economic impact of the introduction of this installation depends on the area of the collector and the volume of the boiler. The maximum effect is achieved in the areas farthest from the heating plant and any other sources of hot water.